Compressor MF 75

Aspro MF 75 compressors, due to their simple functioning and high performance, are an ideal solution adaptable to high capacity refueling stations demands, guaranteeing a quick, efficient and safe CNG refilling.

 

  • Inlet pressure: 1.5 to 25 bar (21.7 to 725 PSI)
  • Flow: 380 to 1.430 Nm³/h (223,6 to 842 SCF/m)
  • Horizontal reciprocating 2 / 3 / 4 stages
  • Direct coupling
  • Electric motor or gas driven engine
  • Power: 110 / 160 / 185 / 200 kW (150 / 215 / 250 / 270 HP)
  • Air cooled
  • Lubrication system
  • Last compression stage condensers
Compressor MF 75

Aspro MF 75 compressors, due to their simple functioning and high performance, are an ideal solution adaptable to high capacity refueling stations demands, guaranteeing a quick, efficient and safe CNG refilling.

 

  • Inlet pressure: 1.5 to 25 bar (21.7 to 725 PSI)
  • Flow: 380 to 1.430 Nm³/h (223,6 to 842 SCF/m)
  • Horizontal reciprocating 2 / 3 / 4 stages
  • Direct coupling
  • Electric motor or gas driven engine
  • Power: 110 / 160 / 185 / 200 kW (150 / 215 / 250 / 270 HP)
  • Air cooled
  • Lubrication system
  • Last compression stage condensers
IODM 75 3-123-163-19 3-25 4-34RE 4R
Type

Horizontal Reciprocating

Number of stages
3333444
Max. suction pressure
14 bar (203 PSI)19 bar (276 PSI)19 bar (276,5 PSI)25 bar (363 PSI) 3 bar (43.5 PSI) 4.5 bar (65 PSI) 2 bar (87 PSI)
Min. suction pressure
7 bar (101.5 PSI) 12 bar (174 PSI) 12 bar (174 PSI) 12 bar (174 PSI)1.5 bar (22 PSI) 2 bar (29 PSI) 2 bar (29 PSI)
Discharge pressure
250-300 bar (3625-4350 PSI)
Stroke (mm)
75
Main motor power
110/160/185kW (150/220/250HP)160/200kW (220/270HP)
Air-cooler power
11 kW
Voltage - Frequency
380 / 440 vca - 50 / 60 hz
Speed (RPM)
1480/1780
  • Acoustic enclosure with FLP lighting
  • Crankcase oil level sensor
  • Spark proof coupling guard
  • Vent pipe with flame arrester
  • Gas detector
  • Gas sampling system
  • Pre-lubricator
  • Pressure reducing system
  • High - temperature pipes protection
  • Lube oil heater
  • Fire fighting system
  • Temperature switch
  • Flame detector
  • Containers automatic drain
  • Gas flow meter
  • Inlet filter (single or duplex)
  • Priority panel for discharge to storage or dispensers
  • On board control panel
  • Inter-stage pressure transducers
  • Remote Monitoring
  • Inter-stage temperature transducer
  • Pressure regulating valve with optional low pressure by pass
  • MF 752 / 3 / 4 Gas Engine2 / 3 / 4 Electric motor
    Height
    3.000 mm / 9' 10"2.340 mm / 7' 8"
    Width
    2.600 mm / 8' 6"2.600 mm / 8' 6"
    Lenght
    4.500 mm / 14' 9"2.010 mm / 6' 11"
    Weight
    aprox. 5.000 / 7.000 / 8.000 / 12.000aprox. 5.000 / 7.000 / 8.000 / 12.000